Ferrotron 559H Original

Outside Diameter Cylindrical Coil Ferrotron 559H

Ferrotron 559H Original

Frequency (Up to 3000 kHz)

Similar to Ferrotron 559H standard, Original has nearly constant permeability over a wide range of flux densities and excellent machinability. When compared to Ferrotron 559H, Original has better mechanical strength, higher magnetic permeability, saturation flux density and thermal conductivity. These improvements do come at a cost of dielectric strength and magnetic losses.

Note: There are many variables involved in an induction process. In order to utilize the fullest potential of our product, you must help narrow down the parameters you are operating with. Each grade of Fluxtrol material has its own distinctive properties that are beneficial to a certain range of electrical and design parameters.

Contact Fluxtrol Inc. to receive more information about which material is right for you.

To buy Ferrotron 559H Original, fill out the contact form on this page and we will be in touch with you shortly.

Gallery

2 Turn O.D.

Hair Pin

I.D. Multi Turn

Pancake

I.D. Single Turn

Split and Return

Transverse Flux

Ferrotron 559H Original Properties

Property	Units	Ferrotron 559H Original
µ_r initial_⟂	None	20
µ_r maximum_⟂	None	24
µ_r initial_∥	None	15
µ_r maximum_∥	None	18
B_s	T	1.3
Dielectric Strength	kV/m	40
κ_⟂	W/m-K	7.8
κ_∥	W/m-K	4.4
CTE_⟂	1/K	1.3 X 10^-5
CTE_∥	1/K	1.4 X 10^-5
C_p	J/g-°C	0.48
Density	g/cm³	6.15
Hardness	D scale	93
Flexural Strength_⟂	MPA	50.8
Flexural Strength_∥	MPA	50.4
Modulus_⟂	Tangent 0.07% – MPA	32,000
Modulus_∥	Tangent 0.07% – MPA	33,800

Ferrotron 559H Original Graphs

H (A/m)	B⟂	B∥
300	0.007	0.006
500	0.016	0.010
1000	0.027	0.020
2000	0.057	0.041
3000	0.087	0.063
4000	0.118	0.085
5000	0.148	0.107
6000	0.178	0.130
8000	0.240	0.175
10000	0.300	0.219
12000	0.356	0.265
15000	0.437	0.333
20000	0.562	0.438
25000	0.674	0.540
30000	0.773	0.635
35000	0.860	0.727
40000	0.937	0.808
50000	1.067	0.952

H (A/m)	µ_r⟂	µ_r∥
300	20	15
500	21	16
1000	22	16
2000	23	17
3000	23	17
4000	23	17
5000	24	17
6000	24	17
8000	24	17
10000	24	17
12000	24	18
15000	23	18
20000	22	17
25000	21	17
30000	20	17
35000	20	16
40000	19	16
50000	17	15

Symbol	Description
Pv = aB^2(1-B/b)f + cB²f²
Pv	Power Density (W/cm³)
B	Magnetic Flux Density (T)
f	Frequency (kHz)
a, b, c	Constants
Ferrotron 559H Original Constants	Value
a	1.89
b	1.8
c	0.0005

Symbol	Description
Pv = aB^2(1-B/b)f + cB²f²
Pv	Power Density (W/cm³)
B	Magnetic Flux Density (T)
f	Frequency (kHz)
a, b, c	Constants
Ferrotron 559H Original Constants	Value
a	1.89
b	1.8
c	0.0005

Flexure Strain⟂ (mm/mm)	Flexure Stress⟂ (MPA)	Flexure Strain∥ (mm/mm)	Flexure Stress∥ (MPA)
0.00000	0.0	0.00000	0.0
0.00049	7.2	0.00050	10.4
0.00100	23.4	0.00100	27.1
0.00150	37.9	0.00150	40.7
0.00199	48.1	0.00200	49.0
0.00220	50.3	0.00220	50.3
0.00250	50.6	0.00240	49.9
0.00270	48.0	0.00260	47.3
0.00300	37.7	0.00300	34.8
0.00349	25.6	0.00350	20.6
0.00400	18.8	0.00400	14.3
0.00450	14.5	0.00450	10.8

Ferrotron 559H Original Stock Sizes

Round Stock Sizes

Rectangle Stock Sizes

Rounds / Billets

Size in Inches		Size in Millimeters
0.500 Ø X 2.00	2.000 Ø X 3.00	12.7 Ø X 50.8	50.8 Ø X 76.2
0.670 Ø X 2.00	2.300 Ø X 2.00	17.0 Ø X 50.8	58.4 Ø X 50.8
0.750 Ø X 2.00	2.300 Ø X 3.00	19.0 Ø X 50.8	58.4 Ø X 76.2
1.000 Ø X 2.00	2.500 Ø X 2.00	25.4 Ø X 50.8	63.5 Ø X 50.8
1.250 Ø X 2.00	2.500 Ø X 2.50	31.7 Ø X 50.8	63.5 Ø X 63.5
1.250 Ø X 3.00	2.500 Ø X 3.00	31.7 Ø X 76.2	63.5 Ø X 76.2
1.500 Ø X 2.00	2.760 Ø X 2.00	38.1 Ø X 50.8	70.1 Ø X 50.8
1.500 Ø X 3.00	2.760 Ø X 3.00	38.1 Ø X 76.2	70.1 Ø X 76.2
1.750 Ø X 2.00	3.000 Ø X 1.00	44.5 Ø X 50.8	76.2 Ø X 25.4
1.750 Ø X 3.00	3.000 Ø X 2.00	44.5 Ø X 76.2	76.2 Ø X 50.8
2.000 Ø X 2.00	4.00 Ø X 0.75	50.8 Ø X 50.8	101.5 Ø X 19.0

Rectangular Blocks

Size in Inches	Size in Millimeters
0.63 X 0.63 X 4.00	16 X 16 X 101.5
0.75 X 0.75 X 4.00	19 X 19 X 101.5
0.75 X 2.00 X 4.00	19 X 50.8 X 101.5
1.00 X 1.00 X 2.00	25.4 X 25.4 X 50.8
0.75 X 6.50 X 8.75	19 X 165 X 222.2